Resistance

X Resistance

Tooltip

You take this much less X Damage. Negative values cause to take more Damage instead.

Maximum Resistance is capped at 75% by default and cannot be higher than 90%.

Resistance is a form of damage reduction that reduces damage of a particular type by a percentage. Players and enemies all have a resistance stat to each of Fire, Cold, Lightning and Chaos damage, and these are raised or lowered independently. Increases to "Elemental Resistance" are applied to fire, cold and lightning but not chaos.

Resistance has a default value of 0, where it does not affect the damage taken. Maximum resistances are soft capped at 75% by default but can be increased to a hard cap of 90%. Resistance can go into the negatives, which increases damage taken.

Characters receive a -10% penalty to elemental resistance at certain area level thresholds, approximately around the end of each act. By endgame, the cumulative penalty is -60% to all elemental resistances.

Honour Resistance is a stat used exclusively in Trial of the Sekhemas, and is calculated the same way.

Mechanics

Calculation

Final Damage = D * (100-R)/100

Example: being hit by 1000 fire damage, with a fire resistance of 30%, means you would take: 1000 * (100-30)/100 = 1000 * 0.7 = 700 damage

The higher your resistance gets, the more effective an increase in resistance is in reducing damage taken. This makes increases to maximum resistance a particularly valuable stat. For example, increasing resistance by 10 from 0% to 10% will reduce damage taken from 100% to 90%, or 10% less. But increasing by 10 from 60% to 70% would be reducing damage taken from 40% to 30%, reducing damage taken by a quarter.

Elemental Exposure

Exposure is a debuff applied to an enemy that reduces their resistance to that element (by default -20% for 4 seconds), which can result in negative resistance values. This debuff only exists for the three types of elemental damage, and there is currently no Chaos Exposure.

Curses

There are a variety of curses that each reduce an enemy's resistance to a specific type of damage (Flammability, Hypothermia, Conductivity and Despair). Curses count as debuffs and stack with Exposure.

Resistance Penetration

Having Penetration in a damage type reduces the effective resistance of enemies you damage with that type, thus increasing the damage they take. It stacks with Exposure and Curses, but is applied last and is only effective against positive resistances; it has no effect once the effective resistance after Exposure and Curses is 0 or negative. Unlike both, Penetration is not a debuff but an innate characteristic of the player.

Ignore resistance

Effects which cause damage to ignore enemy resistances will calculate damage as if the enemy had 0% of the ignored resistance, and ignores any further modifications to resistances. It does not affect the actual resistance, and does not interact with stats that care about the specific resistance value.

Version history

Version	Changes
0.1.0e	Maps no longer have additional elemental resistance penalties inherently applied at Tier 6 and Tier 11 or higher Maps. It is now consistent across all of the Endgame.
0.1.0	Introduced to the game.